Logo Schmitt Kreiselpumpen GmbH, Ettlingen
chemical resistant pumps for corrosive and highly pure media
Contact Adviser


Do you have any questions regarding our products? We will be glad to assist you. Our technical hotline can be reached at the following hours: 
Monday through Thursday  8.00 am to 5.00pm
Friday 8.00 am to 3.30 pm

Tel: +49 7243 - 54 53 13

from within Germany: 07243 - 54 53 13
E-mail: sales@schmitt-pumpen.de

Montag bis Donnerstag 8.00 Uhr bis 17.00 Uhr


Submersible pump: T series

  • Submersible pumps
  • Materials: PVDF (polyvinylidene fluoride) or PP (polypropylene)
  • Vertical submersible pumps without gaskets
  • Dry run safe
  • Max. output rate: 280 l/min
  • Max. discharge head: 28 m
  • Immersion depth: 200 - 800 mm
  • Motor power: 0.18 - 2.2 KW


In the T Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings and therefore runs completely contact free and abrasion-free inside the housing. Due to the design, the use of bearing and shaft seals can be forfeited.

Advantages of the T Pump Series:

  • absolutely dry run safe (no contact of mechanical parts)
  • highest chemical resistance
  • robust, thick-walled design
  • long-lasting and abrasion-free
  • design for the operation under demanding conditions
  • open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible)
  • no abrasion into the medium to be pumped (high purity applications)
  • no metal parts are in contact with the medium
  • easy to maintain
  • universally applicable, quiet and compact
  • various chemical resistant materials can be supplied from the warehouse
  • available for standardized immersion depths

The T Pump Series is particularly suitable if containers or dipping baths cannot be flange connected to the side or if dry run in the plant cannot be excluded.

This results in application possibilities, amongst others, for the following application fields:

  • Wafer production
  • Gas and exhaust air scrubber
  • Environment engineering
  • PCB manufacturing
  • Laboratory and medical and pharmaceutical technology
  • Electro-plating technology
  • Semiconductor technology
  • Wastewater treatment
  • Solar cell production
  • Circulation and mixing application


Materials and Components

  • Parts in contact with the medium are made solid of PVDF, (up to +95° C), or PP (up to +80° C)
  • Housing seal alternatively made of FKM, EPDM, FEP or Kalrez®
  • Also with extension pipe and/or with filter basket
  • High-quality electric motors made in Germany

Material Details

  • PVDF: Polyvinylidene Fluoride, Pure, milky white, not colored (up to +95° C)
  • PP: Polypropylene, Fiber glass-reinforced, gray (up to +80° C)
  • FKM: Viton ® - quality, -20...+200 °C
  • EPDM: Ethylene propylene diene M-class rubber, Food-safe (FDA, KTW, WRC), -40...+160° C
  • FEP: Fluorinated ethylene propylene with Viton® or silicone core, -60…+200° C
  • Kalrez®: High performance elastomere up to +315° C

Motor Details

  • Standard Motors (stock items):
    • Three-phase motors: 230/400 V 3ph, 50 Hz, IP 55, insulation-class F or 277/480 V 60 Hz also with PTC thermistor
    • Alternating current motors: 230 V 1ph, 50/60 Hz, IP 55, Insulation class F
  • Special design models (available):
    • Three-phase motors, explosion proof, flameproof enclosure, EEx de II CT4
    • Special voltages and frequencies
    • 2-, 4- and 8-pole
    • UL and CSA execution
    • Special protection types (e.g. IP 65)
    • High temperature designs
    • Special insulation classes (e.g. tropical insulations)
    • Multi area voltage (e.g. 220-290 / 380-500 V 50 Hz; 220-332 / 380-575 V 60 Hz.)
    • Additional designs upon request

Performance Data

Characteristics of the T 100 - T 190 Pump Series

T 100 - T 190 Pump Series

Max. output rate: 280 l/min

Max. discharge head: 28 m

Motor power: 0.12 - 2.20 kW



T 100: 0.12 kW

T 115: 0.25 kW

T 130: 0.55 kW

T 150: 0.75 kW

T 170: 1.50 kW

T 190: 2.20 kW


Download Leaflet and Operation Manual

Pump Selection Form