Logo Schmitt Kreiselpumpen GmbH, Ettlingen
chemical resistant pumps for corrosive and highly pure media
Contact Adviser
 

Pumpadvisory

Do you have any questions regarding our products? We will be glad to assist you. Our technical hotline can be reached at the following hours: 
Monday through Thursday  8.00 am to 5.00pm
Friday 8.00 am to 3.30 pm

Tel: +49 7243 - 54 53 13

from within Germany: 07243 - 54 53 13
E-mail: sales@schmitt-pumpen.de

Montag bis Donnerstag 8.00 Uhr bis 17.00 Uhr

 

Submersible pump: TE series

  • Submersible pumps
  • Material: Stainless steel 1.4571
  • Vertical submersible pumps without gaskets
  • Dry run safe
  • For high media temperatures
  • Max. output rate: 280 l/min
  • Max. discharge head: 23 m
  • Immersion depth: 200 - 800 mm
  • Motor power: 0.18 - 2.2 KW

Description

In the TE Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings and therefore runs completely contact free and abrasion-free inside the housing. Due to the construction design, the use of bearing and shaft seals can be forfeited. All parts that are in contact with the medium are made solid of stainless steel (1.4581).

Advantages of the TE Pump Series

  • Application at high temperatures up to +150° C
  • Absolutely dry run safe (no contact of mechanical parts)
  • The highest chemical resistance
  • Robust, thick-walled design, made of only two materials (no thin-walled deep-drawing sheet metal)
  • Long-lasting and abrasion-free
  • Design for the operation under demanding conditions
  • Open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible)
  • No abrasion into the medium to be pumped (high purity applications)
  • Easy to maintain
  • Universally applicable, quiet and compact
  • Available for standardized immersion depths

The TE Pump Series is particularly suitable if containers or dipping baths cannot be flange connected to the side or if dry run in the plant cannot be excluded as well as for high temperatures.

This results in application possibilities, amongst others, for the following application fields:

  • Electro-plating technology
  • Airplane jet engine cleaning plants
  • Filtration
  • Large-scale bakeries
  • Smokeries for meat production
  • For very hot alkaline liquids
  • Laboratory applications
  • Environment engineering
  • Food industry
  • Circulating and mixing tasks
  • Application for dirty and metallically polluted media

Types

Materials and Components

  • Supporting pipe and shaft made of 1.4571 (A4)
  • Impeller and housing made of stainless steel fine cast 1.4581 (A4)
  • Housing gasket made of PTFE
  • High-quality electric motors made in Germany

Material Details

  • Stainless Steel: 1.4571 or stainless steel fine cast 1.4581 (A4) (up to +150° C)
  • PTFE: Pure Teflon®, fiber glass or carbon fiber reinforced

Motor Details

  • Standard Motors (stock items):
    • Three-phase motors: 230/400 V 3ph, 50 Hz, IP 55, insulation-class F or 277/480 V 60 Hz also with PTC thermistor
    • Alternating current motors: 230 V 1ph, 50/60 Hz, IP 55, Insulation class F
  • Special design models (available):
    • Three-phase motors, explosion proof, flameproof enclosure, EEx de II CT4
    • Special voltages and frequencies
    • 2-, 4- and 8-pole
    • UL and CSA execution
    • Special protection types (e.g. IP 65)
    • High temperature designs
    • Special insulation classes (e.g. tropical insulations)
    • Multi area voltage (e.g. 220-290 / 380-500 V 50 Hz; 220-332 / 380-575 V 60 Hz.)
    • Additional designs upon request

Performance Data

Characteristics of the TE 115 - TE 190 Pump Series

TE 115 - TE 190 Pump Series

Max. output rate: 280 l/min

Max. discharge head: 23 m

Motor power: 0.25 - 2.20 kW

 

 

TE 115: 0.25 kW

TE 130: 0.55 kW

TE 150: 0.75 kW

TE 170: 1.50 kW

TE 190: 2.20 kW

Download

Download Leaflet and Operation Manual
Fittings
Certificates

Pump Selection Form